STRIP-KWIK

BioGuard Strip-Kwik® removes oil and grease from any type filter. Proper filtration and chemical treatment are equally important in maintaining good swimming pool water. Body oils and suntan lotions, which collect in the pool filter, reduce the filter’s efficiency. Use of this product promotes better filtration, lengthens filter cycles, and reduces maintenance costs. This product should be used twice each season for residential pools and every six weeks in heavily-used pools and commercial pools.

Does cleaning my filter really make that much of a difference?

Yes! Having a clean filter makes a significant impact on the quality of your pool’s water. A clean filter allows for proper filtration which is essential to achieving and maintaining safe, crystal clear water.

• Removes grease & oil from filters
• Keeps filter working at optimum performance
• Recommended for sand & cartridge filters
• Use as needed

Available sizes: 1 quart

• pH: >11.4

Instructions for Sand:

1. Turn off the pump and set the filter to BACKWASH.
2. Backwash filter for 3 minutes, then turn off pump. Leave filter in BACKWASH.
3. Apply 1 bottle of Strip Kwik^® or Kleen It^® into the skimmer basket. If you have more than one skimmer or no skimmers, add to pump basket.
4. Turn on the pump for 5 seconds or as long as it takes for the product to appear in the sight glass, whichever comes first. (It will take less time if you add the product through the pump basket.) Shut off the pump.
5. Let the product sit in the filter for 1 hour minimum (overnight preferred).
6. Leave filter in BACKWASH; turn pump on and backwash for 3-5 minutes.
7. Set filter to RINSE and rinse for 30-60 seconds.
8. Set filter to FILTER to complete the cleaning process.

Instructions for Cartridge:

1. Turn off system and remove cartridge filter from its housing.
2. Apply either Strip Kwik^® or Kleen It^®  to a 5-gallon bucket of water and mix.
3. Place cartridge in solution; soak for at least 1 hour. Flip filter if necessary.
4. After soaking, rinse filter well with fresh water and allow it to dry.
5. Reinstall cartridge filter in its housing; dispose of soaking solution.

• MSDS